6�- CONFIGURATION
The device is configured with the
CirCAMP-xxP
concentrator via PLC communications.
Certain parameters can be configured via DLMS. (See
“7.- COMMUNICATIONS”
)
7�- COMMUNICATIONS
7.1.-
OPTICAL COMMUNICATIONS PORT
In all versions, the device has a serial optical communications port, in compliance with the UNE
EN 62056-21:2003 Standard.
The communications port is fully compatible with the optical heads approved by major utility
companies.
There is a profile for the correct fastening and location of the optical heads on the surface of
the cover.
CirCAMP-xxP
uses the DLMS communications protocol, see
“
7.4.- DLMS PROTOCOL
”.
7.2.-
PLC COMMUNICATIONS
The device is equipped with a communications system that communicates via the electrical
network, using PLC technology that allows the energy meters to be connected to the network
with no need for additional cabling.
PLC (Power Line Communications) transfers data via the electrical network using advanced
modulation technology.
The PLC frequency bands are defined by different committees: FCC for North America and
Canada, ARIB for Asia and Japan and CENELEC for Europe.
CirCAMP-xxP
uses the DLMS communications protocol, see
“
7.4.- DLMS PROTOCOL
”.
29
Instruction Manual
CirCAMP-4DP, CirCAMP-2IP
Содержание CirCAMP-2IP
