3.2.- INSTALLATION
On the side of the device are all of the indications adjusted to the CEI 62052-11 standard.
The device is installed on a DIN rail. All connections are located inside the electric panel.
Terminals, opening roofs or removing elements can expose parts that are haz-
ardous to the touch while the device is powered. Do not use the device until it is
fully installed.
3.3.- DEVICE TERMINALS
3�3�1�- CirCAMP-4DP MODEL
Table 3:List of CirCAMP-4DP terminals
Device terminals
1 :
Input channel 1
25,26 :
Channel 3 relay output
3 :
Output channel 1
27,28 :
Channel 4 relay output
4 :
Input channel 2 / Power supply
31 :
Impulse input common
6 :
Output channel 2
32 :
Channel 1 impulse input
7 :
Input channel 3
33 :
Channel 2 impulse input
9 :
Output channel 3
34 :
Channel 3 impulse input
10:
Input channel 4
35 :
Channel 4 impulse input
11 :
Neutral connection
36,37 :
Reclose input
12 :
Output channel 4
38 :
B
, RS-485 communications (according to version)
21,22 :
Channel 1 relay output
39 :
S
, RS-485 communications (according to version)
23,24 :
Channel 2 relay output
40 :
A
, RS-485 communications (according to version)
1
3
4
6
11
7
9
10
12
31 32 33 34 35 36 37 38 39 40
21 22 23 24 25 26 27 28
Figure 1:CirCAMP-4DP terminals�
10
CirCAMP-4DP, CirCAMP-2IP
Instruction Manual
Содержание CirCAMP-2IP
