Great job!
You successfully soldered your first component! We have many more
things to solder ahead of us, so we better hop to the next component.
Part two - the speaker connector
The next thing we'll solder is the
speaker connector
. That is the little white thingy
you got in one of the plastic bags.
You need to put the speaker connector here:
Take your soldering iron, turn over the PCB and start soldering.
Beware not to solder the chip near the pins on the front side.
Part three - pushbuttons
Now is the time to solder the
pushbuttons
!
Buttons are the most commonly used input, and there are a total of 5 of them.
The buttons consist of two parts -
the mechanical button parts and the button
caps
. Buttons can work even without the caps, but pressing them with the caps on
feels way nicer, and they look a lot cooler.
