After inserting the first slider, turn the board upside down and solder the three pins.
This is what your PCB should look like after soldering the sliders.
And the back:
Congrats! You successfully soldered all of the components!
The hard part is done.
The only thing left to do before connecting Synthia to the PC
to check if everything is soldered properly is to connect the speaker!
We hope you had a great time soldering the components. Sadly, you'll have to
turn
off your soldering iron now
, but there are fun steps ahead, and we're not quite
done yet! Please turn off your soldering iron by unplugging it from the power outlet.
Leave it on the soldering iron stand for at least five minutes so it cools off before
you put it away.
Ready to continue?
Part six - connecting the speaker
We have to
connect the speaker
before doing the hardware test because, without
it, we couldn't check the main feature on Synthia - the sound!
