Circuitmess Synthia, Руководство по сборке

Страница: 9 / 30

It’s a useful tool when you’re trying to figure out what went wrong with any
electronics kit.
Solder wick
You can use solder wick along with the desoldering vacuum tool to clean up any
soldering mistakes. Just put it on the wrongly soldered joint and press on it with a
hot soldering iron, then it will soak up the excess solder like a sponge!
Useful for fixing solder joints when they cannot be easily reached with a solder
sucker.
Assembly
Soldering introduction
The first thing that you'll do as a part of the Synthia assembly process is
soldering!
Have you ever done that before? If your answer is no, we suggest you look at the
following few links, where you'll find useful tutorials and blogs about soldering. It will
only take you 10 minutes to get into the zone and understand how it's done. Here
are the links:
1. Adafruit’s video tutorial featuring Collin Cunningham - A tutorial featuring
Collin Cunningham, a super charismatic electronics guru.
2. Adafruit’s standard soldering tutorial - A great and thorough video tutorial. An
absolute must-read, even if you know how to solder. Make sure to check the
“common soldering mistakes” section at the end.
3. Sparkfun’s video soldering tutorial - Another well-made how-to-solder video
tutorial.
4. Sparkfun’s standard soldering tutorial - A detailed tutorial made by Sparkfun.