As with any other CircuitMess device, the most important thing to check is if all
buttons, encoders, and sliders are working properly. The other important thing to
check is the LEDs.
Step #2
The first time you connect your Synthia to the PC, you'll hear Spencer's voice
(if
you are new here and don't know who Spencer is, that is our DIY voice assistant!).
Spencer will congrats you on your success and guide you through the first check so
you won't be able to miss anything.
However, we wanted to make a written trail so you can follow this as well.
Step #3
The first thing you'll have to check are the pushbuttons.
You'll have to
push each
one of them
, and if they're working properly,
the green light should light up
under
them.
Everything is working? Amazing!
Now you have to
click on encoders and rotate them a bit
. If the encoders are
working, you should see
the LEDs lightning up on the LED matrix depending on
where you are positioned on the matrix.
