CipherLab 9500 Series, Справочное руководство

Страница: 153 / 153

143
Appendix IV 2D Imager
Channel Interpretation). All data characters 92
DEC
are
doubled.
2 Scan engine is set for Basic Channel operation (no escape
character transmission protocol). Data characters 92
DEC
are
not doubled.
When decoders are set to this mode, unbuffered Macro
symbols and symbols requiring the decoder to convey
ECI escape sequences cannot be transmitted.
3 The barcode contains a GS1-128 symbol, and the first
codeword is 903-907, 912, 914, 915.
4 The barcode contains a GS1-128 symbol, and the first
codeword is in the range 908-909.
5 The barcode contains a GS1-128 symbol, and the first
codeword is in the range 910-911.
A PDF417 barcode, ABCD, with no transmission protocol enabled, is
transmitted as
]L2
ABCD.
0 ECC 000-140, not supported.
1 ECC 200.
2 ECC 200,
FNC1
in first or fifth position.
3 ECC 200,
FNC1
in second or sixth position.
4 ECC 200, ECI protocol implemented.
5 ECC 200,
FNC1
in first or fifth position, ECI protocol
implemented.
Data Matrix
6
ECC 200,
FNC1
in second or sixth position, ECI protocol
implemented.
0 Mode 4 or 5
1 Mode 2 or 3
2 Mode 4 or 5, ECI protocol implemented.
Maxicode
3 Mode 2 or 3, ECI protocol implemented in secondary
message.
0 Model 1
1 Model 2, ECI protocol not implemented.
2 Model 2, ECI protocol implemented.
3 Model 2, ECI protocol not implemented,
FNC1
implied in first
position.
4
Model 2, ECI protocol implemented,
FNC1
implied in first
position.
5 Model 2, ECI protocol not implemented,
FNC1
implied in
second position.
QR Code
6 Model 2, ECI protocol implemented,
FNC1
implied in second
position