CipherLab 9500 Series, Справочное руководство

Страница: 133 / 153

123
The tables below list reader settings as well as symbology settings for the Long Range
Laser (LR) or Extra Long Range Laser (ELR) scan engine.
READER SETTINGS TABLE
LR/ELR Engine Description Default
Decode Time-out Set the maximum time for decoding to continue during a
scan attempt.
1~9 (second)
3.0 sec.
Aiming Time-out Decide whether to have the aiming dot. When you press
the [SCAN] button, the scan engine will emit a red dot for
aiming. It will stay on until it times out or you press the
[SCAN] button again. Then, it will emit a scan beam.
0~9, in units of 1 second.
Enter 0 if aiming is not desired.
No aiming
Read Redundancy Level 1
Level 1 The following barcodes must be successfully read twice before being
decoded:
Barcode Types Code Length
Codabar All
MSI 4 characters or less
Industrial 25 (Discrete 25) 8 characters or less
Interleaved 25 8 characters or less
Level 2 All barcodes must be successfully read twice before being decoded.
Level 3 All barcodes except for the following barcodes must be successfully read
twice before being decoded. The following barcodes must be read three
times:
Barcode Types “Excluded” Code Length
MSI 4 characters or less
Industrial 25 (Discrete 25) 8 characters or less
Interleaved 25 8 characters or less
Level 4 All barcodes must be successfully read three times before being decoded.
Appendix III
LR, ELR LASER