CipherLab 9500 Series, Справочное руководство

Страница: 135 / 153

125
Appendix III LR, ELR Laser
SYMBOLOGY SETTINGS TABLE
LR/ELR Engine Description Default
Codabar Enable
CLSI Editing When applied, the CLSI editing strips the start/stop
characters and inserts a space after the first, fifth, and
tenth characters of a 14-character Codabar barcode.
The 14-character barcode length does not include
start/stop characters.
No
NOTIS Editing Decide whether to include the start/stop characters in the
data being transmitted.
NOTIS Editing is to strip the start/stop characters,
which equals to “Disable Transmit Start/Stop
Characters".
No
Select Length One or two fixed lengths
Range (1~55)
4~55
Code 128 ---
Code 128 Read standard Code 128 barcodes (= without leading
FNC1 character). Enable
GS1-128
(UCC/EAN-128)
Read UCC/EAN-128 barcodes with leading FNC1 character. Enable
ISBT 128 Read ISBT 128 barcodes. Enable
Industrial 25 (Discrete 25) Enable
Select Length
One or two fixed lengths
Range (1~55)
4~55
Interleaved 25 Enable
Convert to EAN-13 Convert a 14-character barcode into EAN-13 if the
following requirements are met:
The barcode must have a leading 0 and a valid EAN-13
check digit.
“Verify Check Digit” must be disabled.
No
Verify Check Digit Decide whether to verify the check digit. If desired, select
one of the algorithms below. If the check digit is incorrect,
the barcode will not be accepted.
No
USS algorithm
OPCC algorithm
No
Transmit Check Digit Decide whether to include the check digit in the data being
transmitted. No
Select Length
One or two fixed lengths
Range (1~55)
4~55