7
Warning: Before cutting any holes, always check that you will not hit any electrical wiring or water pipes.
Failure to follow safety precautions may cause serious injury or death.
Make sure to mark the centreline before cutting
any hole for installation of outlet and inlet pipes as
shown in fig 3.
Before installing your new Cinderella toilet, please make sure to read each section of this installation manual carefully.
SELECT THE LOCATION
While planning to place the toilet, it is often useful to consider the free
space around the toilet. Make sure to have enough space to both operate
the toilet and sit properly.
Ensure that the desired position of the toilet will not conflict with any other
existing installation such as water pipes, ventilation pipes, electrical instal-
lations etc. The Cinderella Comfort is designed to operate on a 240V AC
circuit with a minimum of 10 amps available. Make sure that you have
enough electricity available and the intended receptacle is within range of
where you plan to install the toilet (fig. 2).
Cinderella Comfort is approved for u
se in bathrooms/wet rooms (IP 34 classified), but water must not be splashed over the
external parts of the toilet. For more information about rules for
installations in wet rooms, please consult a plumber. The toilet
must be placed on a firm and level base. Your Cinderella Comfort can be installed on a heated floor.
Planning and setting up the ventilation is an important part of the installation of your Cinderella toilet. There are several ways of
installing the outlet pipe as well as inlet pipe. Proper installation will ensure optimal airflow and will not restrict the pipe flow.
Outlet Air Pipe:
It is recommended to install the outlet pipe vertically above the roof without any additional bends. Incorrect installation may
cause poor incineration, odours and wear of the product. For detailed instructions on how to install the outlet pipe, please
thoroughly read the section on how to install the outlet air pipe on page 8 - 9.
Inlet Air Pipe:
The Cinderella Comfort toilet is designed to make use of both air supplied into the room and air supplied directly through the
inlet air connection in the back wall. For detailed instructions on how to install the air inlet vent and pipe, please thoroughly read
the Inlet section on how to install the inlet air pipe on 10 - 11.
fig. 3
fig. 2
BEFORE INSTALLATION
PLANNING
YOUR VENTILATION
