![background image](http://html1.mh-extra.com/html/seima/modia-sto-20/modia-sto-20_installation-instructions_1236018001.webp)
Modia /
STO-20
Ceramic Wall Faced Toilet Suite
Installation Instructions
.com.au
Cistern package contents
Important
1
Inspect the components
before installation to ensure there are no visible defects.
If a defect is found, do not install the toilet suite and contact the supplier immediately.
Claims for defects will not be accepted after the product has been installed.
2
This toilet suite is suitable for a variety of set-ups:
n
Cistern — accommodates either
Bottom Entry Inlet connection
(left or right stop valve) or
Back Entry Inlet connection.
n
Pan —
universal trap — accommodates S-trap installation or
P-trap installation (using appropriate connector; not supplied).
3
The toilet suite must be installed by a
licensed plumber. Failure to do so may void
the warranty.
4
Installation must be in accordance with AS/NZS3500.
IN-Modia_STO-20 | v2.0
X9000009 | page 1 of 4
Modia
STO-20
Order codes
STO-20-BE
Back Entry inlet plumbing
STO-20
Bottom Entry inlet plumbing
OR
bo
ttom en
try
inle
t v
alv
e
1 x back entry
inlet valve
Supplied with
STO-20BE.
1 x ceramic cistern lid
1 x ceramic cistern base
Cistern is supplied with flush
valve and bottom entry inlet
valve already installed.
2 x bolts
with seals
For attaching
cistern to pan.
3 x plugs
One required
if installing
back entry (BE)
version; others
can be used to
plug holes in
sides of pan if
required.
1 x rubber seal
For sealing outlet at
base of cistern.
1 x flush button
Half flush left, full
flush right.
Large end of pan connector
can be trimmed to suit setout.
Threaded
section can be
trimmed to
required size.
Pan package contents
1 x ceramic pan
1 x pan connector
For connecting pan to
floor outlet pipe/S-trap.
1 x threaded section
(with flange plate)
Flange attaches to wall;
threaded section links to
pan connector.
2 x concealed
fixing brackets
Optional — can be
used to connect pan
to floor.
2 x floor bolts
(+ white plugs)
2 x washers
Optional fixing #2 —
used with fixing brackets
to secure pan to floor.
Bolt is inserted through
bracket base hole.
2 x caps
(chrome plated)
2 x screws
2 x pan plugs
(white)
Optional fixing #2 — used
to secure pan to concealed
fixing bracket. Plastic plug
is placed into hole in side of
pan exterior, screw is rebated
into plug and then screws
into a hole in upright section
of bracket. Chrome cap is
used to cover plastic plug.
1 x bottom entry
inlet valve
Supplied with
STO-20.