CIM ME550, Руководство оператора

Страница: 48 / 74

OPERATOR MANUAL
5. Human
Machine Interface
44
5.4.3 Mechanical parameters [F3]
This menu allows to set some mechanical parameters of the machine.
From “SETUP” menu press key: or [F3]
In this option the axes offsets are defined, that is the starting points of the axes are regulated so that
they coincide with the values of the coordinates of the fields assigned both to the DOG TAG plates and
to the MEDICAL RED ALERT TAG plates.
Warning: assigning non-correct values causes the malfunctioning of the embosser and possible damages
to some of its components, therefore we strongly recommend that only specialized technical staff use it.
The mechanical adjustments menu consists of 10 items:
•
X load adjustment
it allows to adjust the tag picking position along the X axis.
•
Y load adjustment
it allows to adjust the tag picking position along the Y axis.
•
X emboss adjustment
it allows to align the zero of the embossing fields with the left edge of the Medical Red Alert Tag
plate
•
Y emboss adjustment
it allows to align the zero of the embossing fields with the bottom edge of the tag.
•
X unload adjustment
it allows to adjust position of release of the tagalong X axis.
•
Y unload adjustment
it allows to adjust position of release of the tag along Y axis
•
X stand-by adjustment
it allows to adjust starting position of the clamp along X axis
•
Y stand-by adjustment
it allows to adjust starting position of the clamp along Y axis
•
Punch normal char adj
it allows to adjust the pressure that the hammer must exert on standard characters during the
embossing of Dog Tag plates. With this function the relief of the embossed character or the
depth of the engraved character can be adjusted
•
Punch OCR char adj