CIM ME550, Руководство оператора

Страница: 14 / 74

OPERATOR MANUAL
2. General
information
10
2.10 Safety requirements
The Operator's Area of ME550 is compliant with all the safety requirements
set by the main European and non-European regulations.
Still, we suggest carefully reading the indications contained in the following
pages, where the symbols used in the Machine Operator Area, the possible
dangerous situations and the necessary precautions are described.
Dangerous mechanical parts (belts and pulley) - Risk of being crushed or
trapped.
Make sure you do not enter the working areas with your hands. Tie your
hair to avoid the risk of it being trapped in the machine.
For the same reason keep any hanging objects that you might wear such as
ties, necklaces, pendants or others away from the machine.
The machine is provided with mechanical protections (locks, screens, shields)
and software protection systems to stop immediately all the moving parts
when the front guard is opened. However, in case of damages to the safety
system the machine can work even with the cover open. in this case the
moving mechanical parts represent a potential danger for the operator's
safety. if the protection systems are damaged, switch off the machine and call
for technical support.
Warning: The machine can be started even with a remote control (Personal
Computer). When it is necessary to work on potentially dangerous parts
(removing stuck boards, resetting in case of errors or routine maintenance)
be extremely careful.
High voltage parts - Electrocution hazard
It is not possible to access any high voltage tension part from the Operator's
Area. All the high voltage circuits are positioned in closed areas and protected
by fixed shieldings.
To guarantee maximum safety the covers and all the accessible metal parts
are electrically grounded. Before putting the machine on the market, the
efficiency of the ground connection is checked on all the appliances by the
staff in charge of quality control.
It is forbidden to remove or modify in any way the external and internal guard
protections of the machine. Should it be necessary, please contact the
Technical Service of MF Group
– CIM division.
The machine is provided with special safety protections to avoid the
operator to come in contact with its internal mechanical and electrical parts.
Access to these parts is permitted only to specialized staff in charge of
repairs and maintenance and especially authorized to carry out these tasks.
The simple maintenance can be safely carried out by the operator, as long as
the machine is stopped and disconnected from the power supply.