CIM ME550, Руководство оператора

Страница: 33 / 74

OPERATOR MANUAL
5. Human
Machine Interface
29
5. Human Machine Interface
5.1 Introduction
ME550 is a highly technological embosser that offers maximum functionality and wide operability to
meet all the requirements of the metal plates embossers industry.
The machine allows to set up and perform a job, set its options and parameters, also verify the
functioning of some of its electrical and mechanical components.
To do so the operator uses the console located on the front side of the panel.
5.2 Main screen
This screen is always displayed by the embosser except when you enter one of the functions of the
“MAIN MENU”.
When the embosser is in READY status, the d isplay shows "MAIN MENU", thus allowing the user to
access the various functions available on the machine.
Simply press on the icons on the touch screen corresponding to the required option.
It is possible to access it also when the machine is in ON status.
The functions contained in the
“MAIN MENU” are:
LCD EDIT
Option for the user to plan work and start production.
SETUP
Option for the user but especially for specialized technical staff to set up the
various parameters and the machine configuration.
SERVICE
Option for specialized technical staff to check the functionality of the various
machine components and run possible updating.