manualshive.com logo in svg

Ciena 170-3916-900, Руководство по установке и запуску оборудования

Поделиться
Скачать
Ciena 170-3916-900 Скачать руководство пользователя страница 2

3916 Service Delivery Switch     

Hardware Installation and Start-up Manual

009-3226-001   Standard   Revision E

Copyright

©

 2013-2015 Ciena

®

 Corporation

July 2015

LEGAL NOTICES

THIS DOCUMENT CONTAINS TRADE SECRET INFORMATION OF CIENA

 

CORPORATION AND 

ITS  RECEIPT  OR  POSSESSION  DOES  NOT  CONVEY  ANY  RIGHTS  TO  REPRODUCE

 

OR  DISCLOSE  ITS 

CONTENTS, OR TO MANUFACTURE, USE, OR SELL ANYTHING THAT IT MAY DESCRIBE.

 

REPRODUCTION, 

DISCLOSURE, OR USE IN WHOLE OR IN PART WITHOUT THE SPECIFIC WRITTEN

 

AUTHORIZATION 

OF CIENA CORPORATION IS STRICTLY FORBIDDEN.

EVERY EFFORT HAS BEEN MADE TO ENSURE THAT THE INFORMATION IN THIS DOCUMENT IS
COMPLETE AND ACCURATE AT THE TIME OF PUBLISHING; HOWEVER, THE INFORMATION CONTAINED IN
THIS DOCUMENT IS SUBJECT TO CHANGE.

While the information in this document is believed to be accurate and reliable, except as otherwise expressly
agreed to in writing CIENA PROVIDES THIS DOCUMENT “AS IS” WITHOUT WARRANTY OR CONDITION OF
ANY KIND, EITHER EXPRESS OR IMPLIED. The information and/or products described in this document are
subject to change without notice.

Copyright

©

 2013-2015 Ciena

®

 Corporation. All Rights Reserved

The material contained in this document is also protected by copyright laws of the United States of America and
other countries. It may not be reproduced or distributed in any form by any means, altered in any fashion, or stored
in a data base or retrieval system, without express written permission of the Ciena Corporation.

Security

Ciena

®

 cannot be responsible for unauthorized use of equipment and will not make allowance or credit for

unauthorized use or access.

Contacting Ciena

For additional office locations and phone numbers, please visit the Ciena web site at www.ciena.com. 

Corporate Headquarters

410-694-5700 or 800-921-1144

www.ciena.com

Customer Technical Support/Warranty

In North America

1-800-CIENA24 (243-6224)

 410-865-4961

In Europe, Middle East, 
and Africa

800-CIENA-24-7 (800-2436-2247)

+44-207-012-5508

In Asia-Pacific

800-CIENA-24-7 (800-2436-2247) 
+81-3-6367-3989

+91-124-4340-600 

In Caribbean and Latin 
America

800-CIENA-24-7 (800-2436-2247) 
410-865-4944 (USA)

Sales and General Information

410-694-5700

E-mail: [email protected]

In North America

410-694-5700 or 800-207-3714

E-mail: [email protected]

In Europe

+44-207-012-5500 (UK)

E-mail: [email protected]

In Asia

+81-3-3248-4680 (Japan)

E-mail: [email protected]

In India

+91-124-434-0500

E-mail: [email protected]

In Latin America

011-5255-1719-0220 (Mexico City)

E-mail: [email protected]

Training

877-CIENA-TD (243-6283) 
or 410-865-8996

E-mail: [email protected]

Содержание 170-3916-900

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды