CIAT GeoCIAT, Инструкция по эксплуатации

Страница: 53 / 58

EN
EN - 51
8 FUNCTIONS
8.1 Automatic restart
In the event of a power outage, the unit is restarted automatically in the operating mode active prior to the outage, after a
stoppage of at least 3 minutes and when the outdoor sensor sends a new temperature value to the control board.
8.2 Selecting the operating mode
The compressor must be turned off before changing operating modes.
8.3 Short-cycle protection
The compressor is authorised to restart if it has been stopped for at least 3 of the last 5 minutes.
8.4 Automated self-regulating control
This function adjusts the compressor operating time or the stage differential to best adapt the operation of the unit to the type of
system.
9 OPTIONS
9.1 Pool heating
This option allows you to heat your swimming pool
Kit contents:
- Pool kit installation instructions (with adjustment values for
parameters and an electrical connection diagram)
- Three-way valve
- 10 k
Ω sensor
- A table listing the recommended types of exchanger to install
(exchanger installed at customer's expense).
We recommend using the CIAT ITEX POOL exchanger.
9.2 Humidity sensor
This humidity sensor makes it possible to:
- limit the risks of condensation forming on underfloor cooling
systems
- lower the water setpoint value even further
Kit contents
- Specific installation instructions (with adjustment values for
settings)
- Humidity sensor
9.3 Limiter thermostat
The limiter thermostat limits the water inlet temperature in the
underfloor heating system.
Kit contents:
- Specific installation instructions (with adjustment values for
parameters).
- A limiter thermostat.
If you connect the machine to an underfloor heating system
only (see paragraph 2-3-3-1), the thermostat is positioned
on the water supply elbow at the outlet of the indoor heat
exchanger.
The cable used to connect the thermostat to the HomeConnect
board is 1.70m (not supplied)
9.4 Domestic hot water: BALLON ECS 170L
Used to heat the domestic hot water.
Contents of the Ballon ECS 170L kit:
- Installation instructions
- An uncased module comprising: 170L tank, motorised three-way valve,
2,4kW heating element, class A accelerator pump
- A casing kit for assembly
9.5 Buffer capacity: CAPA 100L
100L mixer tank module – 6 nozzles
Contents of the CAPA 100L kit:
- Installation instructions
- An uncased module comprising: 100L tank – 6 nozzles
- A casing kit for assembly
- Heating element and/or 2-dual zone module option
9.6 Dual zone heating control
Used to heat 2 zones in the home with different setpoints.
Kit contents:
- Installation instructions
- One dual zone control module (to be integrated in the CAPA 100 L)
- One set of flexible connections
- One unit containing the expansion board to control the dual zone
control module
- One 10k
Ω
sensor
9.7 4kW electric heating element
Used to connect an electric heating element to the GeoCIATTM
Modular
Kit contents:
- Installation instructions
- Electric heating element with its retaining bracket
- One set of flexible connections for installing the kit on the GeoCIATTM
Modular
- A terminal block and a power switch
9.8 Passive cooling (Geocooling)
Enables passive cooling of your home without operating the compressor.
Kit contents:
- Installation instructions
- A heat exchanger
- Three-way valve
- One set of flexible connections for installing the Geocooling
- One terminal block with its connector