manualshive.com logo in svg

Ciara Horizon D10500, Руководство пользователя

Поделиться
Скачать
Ciara Horizon D10500 Скачать руководство пользователя страница 62

CIARA

 Horizon D10500 / T10500

 

- 62 - 

4.9 Audio subsystem 

The CIARA Horizon D10500 / T10500 computer supports Intel High Definition Audio through a Realtek® ALC887 audio codec. 
The Realtek® ALC887-based audio subsystem provides the following features : 
 

•

 

8-channel (6 + 2) audio with independent multi-streaming stereo 

•

 

Advanced  jack  sense  for  the  back  panel  audio  connectors  that  enables  the  audio  codec  to  recognize  the  device  that  is 

connected to an audio port. The back panel audio connectors are capable of retasking according to the user’s definition, or 

can be automatically switched depending on the recognized device type. 

•

 

Stereo input and output via back panel connectors 

•

 

Headphone and Mic in functions for front panel audio connectors 

•

 

A signal-to-noise (S/N) ratio of 95 dB 
 

The board provides onboard audio headers and back panel connectors. 
The onboard audio headers include the following : 
 

•

 

Front panel audio (a 10-1 pin header that provides headphone and mic in signals for front panel audio connectors) 

•

 

Internal mono speaker header (1 x 4-pin header) 
 

Front panel headphone output is supported by a separate audio channel pair, allowing multi-streaming audio configurations such as 
simultaneous 8-channel (6 + 2) surround sound playback and stereo audio conferencing (through speakers connected to the back 
panel audio connectors and a headset connected to front panel audio connectors). 
The onboard internal mono speaker header allows connection to an internal, low power speaker for basic system sound capability.  
The back panel audio connectors are configurable through the audio device drivers. 
Audio  software  and  drivers  are  available  from 

https://www.asus.com/ca-en/Motherboards-Components/Motherboards/All-

series/Pro-B550M-C-CSM/HelpDesk_Download/

 or from your private CIARA Website. 

 

4.10 I/O Port set-up 

Each CIARA Horizon D10500 / T10500 computer system includes built-in multi-I/O capabilities. These provide your computer with one  
header for high-speed serial port, one header for parallel port an one Thunderbolt header (an external optional connector is required), 
one HDMI 2.1 video port and two DisplayPort video ports, four SATA connectors (6.0 Gb/s) supporting one drive each, one USB 3.2 
gen. 2 type C port (rear), one USB 3.2 gen. 2 type A port (rear), four USB 3.2 gen. 1 ports (2 rear and 2 internal header), two USB 3.1 
gen. 1 ports (front panel), five USB 2.0 ports (2 rear, 2 front panel and 1 internal header), audio ports (3+2), one 1 Gigabit Ethernet RJ-
45 port and two PS/2 ports. 

To configure these I/O ports use the BIOS configuration screens. Please refer to the paragraphs in section 2.0, “BIOS Configu

ration and 

installation” for more information on this subject.

 

 

NOTE 
 All USB ports along with serial port can be enabled or disabled in the BIOS. 
 

 

Содержание Horizon D10500








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды