●
To disconnect the unit, be sure
to pull by the plug and not the
cord.
(Damage to the power cord can
cause an electric shock.)
●
After installation, arrange the
power cord so that it will not
be stepped on or stepped over.
●
If there is dust, water or etc
on the power plug pin, wipe it
off well.
(There is a danger of an
electric shock or fire.)
●
Do not put any covering on
the rear and side of the prod-
uct. Blocking ventilation holes
may raise inside temperatures
and cause system malfunction
or even system stoppage.
●
Keep tubes fixed properly so as not to splash around area with water from brine and drain tube.
●
Do not install the product in
or around largely damp areas,
at a place near flammable
materials, or at a place
exposed to rain or snow.
(There is a danger of an
electric shock or fire.)
●
Leave the product unplugged,
before cleaning the inside of
the product.
(An electric shock or fire may
occur.)
07
2. Safety precautions
■⃟
Symptoms under normal operations
■⃟
1. During use of the product, a murmuring water-flow sound, a clattering ice dropping sound, etc. may occur
during cold water production process or ice production process.
2. Opaque ice may occasionally be served, but there is no abnormality in product performance or ice quality.
3. TDSs (Total Dissolved Solids) found in ambient water, cold water, and ice may vary from one another.
(This is a result of the freezing point method.)
4. After the system power source is interrupted and then again restarted, irregular ice may temporarily be served.
T-461_영문매뉴얼_T_461_메뉴얼_5170S 12. 4. 10. 오후 4:32 페이지 8
