16
①
This is performed with the power cord plugged in.
②
Hold the lower front panel as pressing down and pull it frontward. Set the
drain switch (A) on located on the upper side and turned the drain valve
[(B) and (C)] on to remove cold, ambient and hot water.
※
When drain switch is set, water dispensing and ice dispensing are available only.
③
Remove ice by pressing "ICE" (Ice dispensing touch button)
※
If there is no other option but to transport the product in an inclined
position, convey the product on the back.
(1)
Ice dispensing mode
If "ICE"(ice dispense) touch button is pressed, the door of the ice storage is opened and ice is served
from the dispensing hole.
※
If "LOCK" function (Ice and Hot water dispensing) is set, Ice dispensing and Hot water selection touch
button does not work. Use it after releasing the lock function.
(2)
Warm water dispensing mode
If "WARM”(warm water selection) touch button is selected and the water dispensing button is
pressed, warm water is served.
※
Warm water temperature is normally 40
O
C~50
O
C.
※
Warm water is served while "HOT" is on. If not, ambient water is served.
(3)
Hot water dispensing mode
If "HOT"(hot water selection) touch button is selected and the water dispensing button is pressed,
hot water is served.
※
If "LOCK" function (Ice and Hot water dispensing lock) is set, hot water is not served. Use it after
releasing the lock function.
※
If hot water operation LED is turned off, hot water is not served, because the heater does not work.
When taking hot water, be careful of burn.
(4)
Cold water dispensing mode
If "COLD"(cold water selection) touch button is selected and water dispensing button is pressed,
cold water is served.
※
Cold water is most frequented water temperature. "COLD" water is being set automatically.
(5)
Ambient water dispensing mode
If "AMBI"(ambient water selection) touch button is selected and water dispensing button is pressed,
ambient water is served.
※
If hot water or ambient water is selected and it is not used for a given time, the system will automati-
cally switch into cold water dispensing mode. (Default function)
※
There is not a separate setting and releasing method for the use of ambient water and cold water.
They operate automatically as designated by the program when the power is supplied.
6. Usage
6-5. Ice and water dispensing method
6-6. Draining method for relocation/installation
(A)
Drain
switch
(C)
Cold water drain
(B)
Hot/Ambi water drain
T-461_영문매뉴얼_T_461_메뉴얼_5170S 12. 4. 10. 오후 4:32 페이지 17
