●
When taking ice, avoid using a glass
cup and avoid taking ice with cup
filled with beverage, coffee etc.
(A glass cup can be broken by abrupt
temperature change or the ice strike.
Beverage and coffee can splash into
ice dispensing hole, it can cause mold.)
●
When taking ice, place a con-
tainer close to the ice dispens-
ing hole not to drop ice on the
floor.
(Be careful in order not to
allow containers such as cups,
etc. to be inserted into the
inside of ice dispensing hole.)
●
To avoid burns from hot
water, use containers such
as a cup during hot water
dispensing.
●
Do not put foreign materials
into the ice dispensing hole or
block the dispensing hole.
(This can cause system
malfunction.)
●
After transporting the product,
do not supply the power for
at least 30 minutes to stabilize
the product.
●
Do not tilt the product over
45
。
during transportation.
(Severe inclination can
performance degradation.)
●
Do not install the product in a
sloped or unstable position.
(This can cause a reduced per-
formance, system damaging or
overall trouble.)
●
Do not install the product in a
place where the temperature
may drop below 32
O
F.(0
O
C)
(Some pieces of ice can cling
to each other, so ice may not
be served well.)
Associated with the possibility of injury, property damage and reduced performance of product.
Caution
06
2. Safety precautions
30 Minutes
T-461_영문매뉴얼_T_461_메뉴얼_5170S 12. 4. 10. 오후 4:32 페이지 7
