ChronTrol XT Series Скачать руководство пользователя | Manualshive

Страница: 51 / 51

background image

ChronTrol Service

ChronTrol Service, during or after the warranty period, is available from ChronTrol
Corporation, 6160 Fairmount Ave., San Diego, CA 92120. (619) 282-8686.

Should you have difficulty with ChronTrol, return the unit postpaid with a description
of the problem experienced.

Enclose $5.00 to cover the shipping and handling charges on all returns. If under
warranty, no additional charges will be made. Non-warranty repair costs will be
advised for approval prior to correction and return.

CAUTION: There are no user-serviceable parts inside a ChronTrol Timer. Servicing
must be performed by a ChronTrol Corporation Authorized Service Technician.

Warranty

ChronTrol Timers are warranted to be free from defects in workmanship or material
under normal use and service for a period of one (1) year from the date of purchase
by the user.

ChronTrol Corporation’s obligation under this Warranty is limited to repairing or
replacing at its Factory Service Center any product which shall, within the time limit set
forth above, be received at its Factory Service Center with transportation charges
prepaid provided that ChronTrol Corporation’s examination discloses to its
satisfaction that such product is defective.

Any adjustment or replacement of defective parts made under this Warranty does not
void the Warranty; nor does it extend the original Warranty period.

This Warranty shall not extend to any ChronTrol product which has been tampered
with or repaired by someone other than ChronTrol Corporation’s Authorized Service
Technician, nor to any product which has been subject to misuse, neglect, accident or
damage, or which has not been properly installed and tested in operation.

Under no circumstances shall ChronTrol Corporation be liable to any purchaser or
third party for any loss of profits or other direct or indirect costs, expenses, losses or
consequential damages arising out of, or as a result of, any defects in, or failure of, its
products, or any part or parts thereof.

This Warranty is in lieu of any other warranty, either expressed or implied, as
to description, quality, merchantability, fitness for any particular purpose or
use, or any other matter.

Copyright 2001 ChronTrol Corporation

«
...
49
50
51

Содержание XT Series




















































Отзывы:

Нет отзывов

Похожие инструкции для XT Series

Бренд: ABB Страницы: 52

Бренд: ABB Страницы: 63

Бренд: Samsung Страницы: 27

Harmony Controller 2000

Бренд: A10 Страницы: 27

Бренд: UNITED Страницы: 22

Бренд: Hafele Страницы: 82

Бренд: ZKTeco Страницы: 11

Бренд: Dantel Страницы: 6

GAMMA VERSUS Series

Бренд: JCM Страницы: 111

767-4804/000-800

Бренд: WAGO Страницы: 80

Бренд: K&K Страницы: 10

MorphoAccess VP MD

Бренд: Idemia Страницы: 29

Sundstrom SR307

Бренд: S.E.A. Group Страницы: 5

SCENE MASTER - V1.0

Бренд: JBSYSTEMS Light Страницы: 24

Бренд: CALEFFI Страницы: 14

Бренд: Parker Страницы: 8

color LaserJet 5500

Бренд: IBM Страницы: 192

AUMATIC ACExC 01.2

Бренд: AUMA Страницы: 92

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды