ChronTrol XT Series, Руководство пользователя

Страница: 41 / 51

ChronTrol XT Series Timers
User's Guide 39
Set Program #2
1. Press
ENTER
, then
2
. E–02 displays.
2. Press
CIRCUIT
, then
2
. C–02 displays.
3. Press
ON
, then
6 0 0
. 600 displays.
4. Press
OFF
, then
4 0 0 AM/PM
. 400. displays.
5. Press
DAY/OMIT
, then
1 2 3 4 5
. Strokes for Monday through Friday
display.
6. Press
ENTER
to store the last entry followed by
TIME
to return to the
Time of Day display.
Sample Program 4: Interval Program with Cycle
Desired effect: To turn Circuit #3 ON for one second, then OFF for four
seconds, over and over again.
Plan: Make the next available program a 1-second On-Off Interval with a 5-
second Cycle Length. Start and stop the program through the keyboard.
Set Program #1.
1. Press
ENTER ENTER
. P– n . displays, where n is the number of the next
available program.
2. Press
CIRCUIT
, then
3
. C–03 displays.
3. Press
INTERVAL
, then
0
. 0000 displays.
4. Press
SECOND
, then
1
. 000001 displays.
5. Press
CYCLE 0 SECOND 5
. 000005 displays.
6. Press
ENTER
to store the last entry, then press
TIME
to return to the
Time of Day display.
Start the Program.
1. Press
PROGRAM
n
ON
, where n is the same program number given
above. Time of Day displays and Circuit #3 starts clicking ON and OFF.
Stop the Program.
1. Press
PROGRAM
n
OFF
. Time of Day displays and Circuit #3 stops
clicking. NOTE : Circuit #3 will remain ON if you turned the program
OFF before it turned the circuit OFF.