XT Series Timer
ChronTrol
10
User's Guide
P
PROGRAM. This character displays when reviewing
the status of an ON/OFF program, when assigning a
Program to a list of control assignments, when
manually switching a program, or when a program is
identified in cross review. It is usually followed by a
number identifying the program.
C
CIRCUIT. This character displays when assigning a
Circuit to a list of control assignments or when
manually switching a circuit. It is usually followed by
a number identifying the circuit. It also indicates day-
based cycle.
E
ENTER. This character displays after pressing the
"Enter" key from the Time display, which is the first
step in all programming sequences.
F
FUNCTION. This character displays when setting or
reviewing the Sequence Start or Daylight Saving
Time functions.
–
This character displays to separate key characters
from their identifying number, for example P–04
(Program #4), to indicate you reached the end of a
list of control assignments or Holidays, to show that
no value was previously assigned to a particular
parameter, or to indicate that an interval program
under review is currently executing.
– –
INPUT. This character displays when reviewing the
status of an input, when assigning an input to a list of
control assignments, when manually switching an
input, or when an input is identified in cross review.
Usually followed by a number identifying the input.
H
Introduces the Holiday List.
Table 1: Special Display Characters
Содержание XT Series
Страница 1: ......
