Chromalox MicroTherm, Руководство по установке и эксплуатации

Страница: 9 / 18

7
Section 3 – Temperature Control Options
CMXO Series OIL
Temperature Control System
START/STOP Pushbuttons
Press START STOP to start the pump.
Indicator will illuminate while pump is
running. Press
START STOP
to stop the pump.
Status and Diagnostic Indicators
System shuts down if any red diag-
nostic indicator is illuminated.
Pump Overload:
• Pump has drawn too much cur-
rent.
Over Temperature:
• System temperature has exceeded
600°F.
Pump Running
Heating
Cooling
Manual Cooling:
• If manual cooling is on, heaters
shut off and water cooling is on.
Normally this is off and the temper-
ature controller determines when
to heat or cool.
Figure 3.1 Control Panel Layout
Inlet Pressure
“From Process”
Outlet Pressure
“To Process”
Temerature Controller