Christie Solaria One, Руководство пользователя

Страница: 97 / 136

Solaria One User Manual 13-19
020-100841-02 Rev. 1 (11-2012)
13.8 Manage Automation
You use automation to send and receive signals from external devices. This section provides instructions for
managing and defining:
•
Macros - A macro is a list of actions that you define. For example, opening the curtains or turning on the
house lights at the end of playback. A macro can be activated by a global trigger, or it can be added to a play
list.
• Input Cues - Input cues wait for events or an Ethernet message received on TPC port 5111. An input cue in
a play list waits for an event before a trailer starts. In a global trigger, a macro runs when an input cue event
occurs.
• Global Triggers - A global trigger combines an input cue with a macro. When the predefined event for the
input cue occurs, the output macro is triggered. For example, a fire alarm input signal could cause playback
to stop and the house lights to come on. A global trigger is always active and is not dependent on specific
play list definitions.
To add a macro or an input cue to a playlist, see Add Automation to a Play List on page 13-8.
13.8.1 Add Automation Devices
To add macros or input cues to a play list, see Add Automation to a Play List on page 13-8.
1. Tap Menu > Christie IMB > System .
2. Tap Automation > Devices .
3. Tap Add .
4. Select a device type.
5. Tap
Accept .
6. Enter a name for the device and then tap Enter .
7. Complete the Name , IP Address , Username , Password , and Serial Command Port fields.
8. Tap Save .
13.8.2 Test Connectivity to an Automation Device
1. Tap Menu > Christie IMB > System .
2. Tap Automation > Devices .
3. Select an automation device in the left pane.
4. Tap
Test .
5. Tap OK .
13.8.3 Remove Automation Devices
1. Tap Menu > Christie IMB > System .
2. Tap Automation > Devices .
3. Select an automation device in the left pane.
4. Tap
Remove .