Christie Solaria One, Руководство пользователя

Страница: 31 / 136

Solaria One User Manual 1-17
020-100841-02 Rev. 1 (11-2012)
1.13 Log On to the Projector
1. On the touch panel controller (TPC), tap Menu > Login .
2. Select a user name in the Username list. To view the permissions associated with each account see User
Access Permissions on page 10-1.
3. Enter your password.
4. Tap
Login .
1.14 Activate Marriage
You must complete marriage to display encrypted content and to comply with Digital Cinema System
Specification (the DCI specification). You cannot complete marriage remotely. In addition, an authorized
employee must be physically present to verify that the anti-tamper seals on the card cage faceplate (
A ) and
firewall ( B ) are unbroken, the projector is unaltered, and to press the marriage button on the card cage
faceplate.
1. Log on to the projector with marriage permissions. See Log On to the Projector on page 1-17.
1. Tap Menu > Service Setup > IMB Marriage .
2. Complete the Marriage wizard.
3. Click Finish .
1.15 Add the Projector to a Network
1. On the touch panel controller (TPC), tap Menu > Login .
2. Select an administrator account in the Username list.
3. Enter a password in the Password field and then tap Login .
4. Tap Menu > Administrator Setup > Communications Configuration .
5. Complete these fields:
Field Description
Device Name The name of the projector.
IP Address The IP address of the projector.
Subnet Mask The subnet mask to which the address belongs.
Gateway The IP address for the network gateway.
A B