Christie Solaria CP2210, Руководство пользователя

Страница: 138 / 164

A-12 CP2210 User Manual
020-100410-07 Rev. 1 (01-2012)
Appendix A: Serial API Commands
NONE
(LMV <lho><lvo><zom><fcs><lhodir><lvodir><zomdir><fcsdir>)
where <lhodir>, <lvodir>, <zomdir>, and <fcsdir> represent the horizontal, vertical, zoom, and focus
position information. Valid values for direction are 1 and -1.
EXAMPLES:
(LMV 1000 1500 500 -500 -1 -1 1 1)
Local Settings (LOC)
S
et the time format and display options for temperature units.
SUBCODE DESCRIPTION OF USE
LANG
Set the current language of the user interface.
TEMP
Set the temperature units. 0 - Celsius. 1 - Fahrenheit.
TIME
Set Time format. 0 - 24 hour, 1 - 12 hour.
EXAMPLES:
(LOC+TIME 1) Set time zone to standard 12 hour
(LOC+TIME?1) Get list of formats
(LOC+TIME?)(LOC+TIME!001) Get time format
Lamp Changed (LPC)
Record current lamp information into the lamp history, then start a new entry. Set lamp information of a new lamp
type ID, serial number, and pre-used hours. When the values are set, use the (LPC 1) command to add the record.
SUBCODE DESCRIPTION OF USE
LPID
Set lamp type ID for the new lamp
NONE
Save lamp information to lamp history
PREV
Set lamp previous lamp hours for the new lamp
SERL
Set lamp serial number for the new lamp
EXAMPLES:
(LPC+LPID 2) Set lamp type ID
(LPC+SERL “CDX30-001”) Set lamp serial number
(LPC 1) Save information to lamp history. Consecutive lamp changes require a 5 - 10 second time difference as writing to
EEPROM is involved.
Lamp File (LPF)
Set or get the current lamp file for the current or a specific channel.
SUBCODE DESCRIPTION OF USE
Cxxx
Set or get the current lamp file for a specific channel
NONE
Set lamp file for current channel
EXAMPLES:
(LPF+C101 “Default”) Set lamp file for channel 1 to file “Default”
(LPF?L) List all available lamp files
(LPF 1) Set lamp file for current channel to index 1 in file list
Lamp Hours (LPH)
Get information on installed lamp. Read only control.
SUBCODE DESCRIPTION OF USE