Christie Secure II SUHD553-L, Руководство пользователя

Страница: 48 / 56

Updating the Scaler firmware using USB
Secure Series II LCD Panels User Guide 48
020-001779-01 Rev. 1 (03-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
4. Select USB Update.
• If the Connected message appears, select USB Update.
The firmware is automatically updated. The panel goes into Stanby mode after a successful
firmware update (approximately 30 seconds).
a. Reset the main power switch to turn the panel on.
b. When the firmware update is complete, perform an Initial Setting in the Factory
menu.
c. When the Initial Setting is complete, power off the panel using the rocker-switch.
d. Wait at least 10 seconds and power the panel on.
• In case the USB storage device is not compatible, a Can’t Detect USB message appears.