Operation
Secure Series II LCD Panels User Guide
40
020-001779-01 Rev. 1 (03-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
Adjusts the amount FRC frequency
1.
From the Setup menu, select FRC Mode.
2.
Select the FRC Mode value.
When the input vertical frequency 50Hz is applied, the screen is correctly displayed on the high-speed
motion screen. Valid values:
•
Free Run: Only 60Hz
•
Lock: 50Hz/60Hz
Use the CEC Control to power the display on or off using a CEC command.
1.
From the Setup menu, select CEC Control.
2.
Enable (On) or disable (Off) the CEC Control.
Set the OPS/HDMI4 EDID.
1.
From the Setup menu, select OPS/HDMI4.
2.
Select the EDID for the OPS/HDMI4.
Valied values: UHD or FHD.
1.
From the Setup menu, select Gamma.
2.
Set the gamma curve.
Valid values: 2.2 standard or DICOM.
When Auto Source Switch is enabled, the display switches to the currently active source automatically. When
the source is removed, the display switches to other active source.
1.
From the Setup menu, select Auto Source Switch.
2.
Enable (On) or disable (Off) switching to the current active source automatically.
When Low Latency Mode is enabled, the video delay is reduced.
1.
From the Setup menu, select Low Latency Mode.
2.
Enable (On) or disable (Off) if the video delay is reduced.
Содержание Secure II SUHD553-L
Страница 1: ...Secure Series II LCD Panels User Guide 020 001779 01...
Страница 55: ......
Страница 56: ......
