Christie Secure II SUHD553-L, Руководство пользователя

Страница: 22 / 56

Secure Series II LCD Panels User Guide 22
020-001779-01 Rev. 1 (03-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
Installation of the display must be performed by a qualified installation specialist.
The appearance of actual components may differ from the image shown. To install batteries in the remote
control:
1. Press the tab on the battery case and open it.
2. Insert the battery (1.5V AAA) into the battery case.
3. Insert the battery case until clack sounds.
• Make sure the battery polarities are correct when installing the batteries.
• If you not using the remote control for a long time, remove the batteries to avoid damage from
battery leakage.
• Do not expose batteries to excessive heat such as sunshine, fire, or so on.
• Make sure nothing obstructs the infrared beam between the remote control and the IR receiver on the
display.
• If the effective range of the remote control decreases, or it stops working, replace the batteries with
new ones.
• The remote control may fail to operate if the infrared remote sensor is exposed to bright sunlight or
fluorescent lighting.