Access the documentation from the Christie website:
Secure Series II LCD Panels User Guide
9
020-001779-01 Rev. 1 (03-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
•
FIRE HAZARD! Do not install near any devices that produce heat such as amplifiers, radiators,
heat registers, or stoves.
•
SHOCK HAZARD! Only use the AC power cord provided with the product or recommended by
Christie.
•
SHOCK HAZARD! Disconnect the product from AC before servicing, cleaning, removing
components, or opening any enclosure.
•
FIRE HAZARD! Do not use a power cord that appears damaged.
•
SHOCK HAZARD! Do not attempt operation if the AC supply is not within the specified voltage and
power range, as specified on the license label.
•
SHOCK HAZARD! The AC power cord must be inserted into an outlet with grounding.
•
Always connect the ground first to reduce shock hazard.
•
TRIP OR FIRE HAZARD! Position all cables where they cannot contact hot surfaces, be pulled, be
tripped over, or damaged by persons walking on or objects rolling over the cables.
•
Do not drop the panel (even a short distance), or apply pressure to the sides of the bezel. The
small size of the bezel, means there is reduced protection of the LCD glass and components.
Dropping the panel or applying unnecessary force to the sides of the bezel will result in
permanent damage.
•
To avoid serious injury and/ or serious damage to the LCD panel, moving the panel requires at
least four people.
•
Extreme care must be taken when pushing the mounted display into its locked position. Always
handle the display on the opposing corners of the frame to avoid direct contact with the LCD
glass.
Caution! If not avoided, the following could result in minor or moderate injury.
•
Do not tilt the product more than ±15 degrees.
•
Use the handles when moving the shipping package.
•
Do not twist, bend, or tilt the panel.
Notice. If not avoided, the following could result in property damage.
•
Install the product at least 10 cm from the wall.
•
Do not install in locations where has vibration or in an unstable position as the product may fall
and cause damage.
•
Do not install in places where dirt, moisture, smoke, much water or rain water can reach the
product.
•
Avoid exposure to direct sunlight and do not place near hot objects such as a fire or heater heat.
This may cause a fire or shortening the product life.
•
Do not place heavy objects on the product.
•
Always provide proper ventilation for the product to prevent overheating.
•
Do not place the screen on a hard surface.
Rate input voltage:
•
SUHD553L: 100 to 240 V, 50/60 Hz, 3.1 to 1.3 A
•
SUHD653L: 100 to 240 V, 50/60 Hz, 2.6 to 1.1 A
•
SUHD753L: 100 to 240 V, 50/60 Hz, 2.9 to 1.2 A
•
SUHD863L: 100 to 240 V, 50/60 Hz, 4.1 to 1.7 A
Содержание Secure II SUHD553-L
Страница 1: ...Secure Series II LCD Panels User Guide 020 001779 01...
Страница 55: ......
Страница 56: ......
