Warning! Failure to comply with the following could result in death or serious injury.
•
FIRE AND SHOCK HAZARD! Do not attempt operation unless the power cord, power socket, and
power plug meet the appropriate local rating standards.
•
SHOCK HAZARD! Only use the AC power cord provided with the product or recommended by
Christie.
•
FIRE OR SHOCK HAZARD! Do not overload power outlets and extension cords.
•
FIRE HAZARD! Do not use a power cord that appears damaged.
Lamp precautions
Lamps used in the projector are under high pressure and must be handled with caution. Lamps can
explode and cause serious personal injury if dropped or mishandled.
Danger! Failure to comply with the following results in death or serious injury.
•
Do not open the lamp door while the lamp is on.
•
EXPLOSION HAZARD! Allow sufficient time for the lamp to cool down before powering down the
product, disconnecting it from AC, and opening the lamp door.
•
Christie products must be installed and serviced by Christie qualified technicians.
•
EXPLOSION HAZARD! Always wear manufacturer approved protective safety clothing (gloves,
jacket, face shield) whenever the lamp door is open or when handling the lamp. Any local or
federal specifications take precedence over Christie's protective clothing recommendations.
Warning! Failure to comply with the following could result in death or serious injury.
•
Possibly hazardous optical radiation emitted from this product. (Risk group 3)
•
Thermal radiation emitted from this product may cause burns. (Risk group 3)
Product safety labels
Learn about the safety labels used on the projector.
Indicates the presence of a grounding point.
Indicates the presence of an earth grounding point.
Indicates the presence of a dangerous condition or situation.
Indicates the presence of a pinch hazard. To avoid personal injury, keep hands clear and loose clothing
tied back.
Indicates the presence of a hot surface. To avoid personal injury, always allow the projector to cool
down for a minimum of 10 minutes before performing maintenance or service procedures.
Introduction
Roadie 4K35 Quick Start Guide
7
020-101671-04 Rev. 1 (01-2016)
Copyright
©
2016 Christie Digital Systems USA Inc. All rights reserved.
