•
Christie approved protective safety clothing if working with the lamp
•
Lens cleaning tissue and solution
Projector components
Learn where to find the components of the projector.
ID
Item
Description
A
Touch panel controller (TPC)
A touch-sensitive screen used to control and monitor operation. See
Touch panel controller.
B
LED status indicators
LED color and blinking rates (located in both back corners of the
projector) provide information about the status of the projector. See
Projector LED status indicators (on page 32).
C
Manual douser override
Closing the douser rotates a shutter blade in front of the lamp and
reduces the lamp power to its minimum. The override is for emergency
use only.
D
Lamp door and lamps
The lamp door provides access to the lamp compartment and must
remain closed and locked for normal operation. Lamp replacement should
only be performed by qualified technicians. See Accessories (on page
42).
E
Low profile extractor
Extracts heated air from the lamp compartment out the back of the
projector. The Roadie Ducted Exhaust kit (not shown) P/N: 113-107109-
xx is available to duct hot air away from the projector. See Accessories
(on page 42).
F
Radiator access door panel
The radiator door provides access to the radiator and liquid cooling
compartment and must remain closed during normal operation.
Installation and Setup
Roadie 4K35 Quick Start Guide
14
020-101671-04 Rev. 1 (01-2016)
Copyright
©
2016 Christie Digital Systems USA Inc. All rights reserved.
