4 : O p e r a t i n g t h e P r o j e c t o r
CHRISTIE DIGITAL SYSTEMS
CineX35 Projector
4-4
May, 2004
10. Form 1.75-inch loop between upper constant-speed sprocket and gate (C), as shown in
Figure 4-1
11. Align the film on upper constant-speed sprocket (A)
and close pad rollers (B).
12. To verify that film is correctly aligned on all sprocket rollers, move motor flywheel
counterclockwise.
•
Framing lamp can be turned “on” or “off” with black rocker switch
located on top of projector.
•
Framing lamp is functional with picture changeover in either
position.
•
If film reel is used, be sure take-up tension is in accordance with reel
manufacturer’s instructions.
