3 : P r o j e c t o r I n s t a l l a t i o n a n d A s s e m b l y
CHRISTIE DIGITAL SYSTEMS
CineX35 Projector
3-2
May, 2004
2. Insert lock washer (item 2 in Figure 3-1) and flat washer (item 3 in Figure 3-1) onto hex
bolt (item 1 in Figure 3-1). Insert hex head bolt, with lock washer and flat washer, into
upper left opening of projector mount. Rotate hex head bolt four full turns.
3. Lift and mount projector to console or pedestal. Thread two remaining hex head bolts
with lock washer and flat washer. Insert into two bottom mounting holes on projector.
4. Level projector on lamp-house or pedestal.
5. Tighten nut on mounting stud using 9/16" wrench.
6. Tighten three hex head bolts using same wrench.
Figure 3-1: Installing the Projector
