Voltage hazard. To avoid personal injury,
always disconnect all power sources before
performing maintenance or service
procedures.
Caution! If not avoided, the following could result in
minor or moderate injury.
Hot surface hazard. To avoid personal
injury, allow the product to cool for the
recommended cool down time before
touching or handling for maintenance or
service.
Burn hazard. To avoid personal injury, allow
the product to cool for the recommended
cool down time before handling for
maintenance or service.
Moving parts hazard. To avoid personal
injury, keep hands clear and loose clothing
tied back.
Moving fan blades. To avoid personal injury,
keep hands clear and loose clothing tied
back. Always disconnect all power sources
before performing maintenance or service
procedures.
Notice. If not avoided, the following could result in
property damage.
General hazard.
Not for household use.
Mandatory action
SHOCK HAZARD! Disconnect all power sources
before performing maintenance or service
procedures.
Consult the service manual.
Electrical labels
Indicates the presence of a protective earth ground.
Indicates the presence of an earth ground.
Additional hazard labels
Indicates high leakage current.
Earth or ground connection
essential before connecting the
power supply.
Indicates a light hazard. Do
not look directly into the lens.
The extreme high brightness
can cause permanent eye
damage.
Important safeguards
To prevent personal injury and to protect the device from
damage, read and follow these safety precautions. This projector
is intended for use in a cinema environment.
General safety precautions
Warning! If not avoided, the following could result in
death or serious injury.
•
TRIP OR FIRE HAZARD! Position all cables where they
cannot contact hot surfaces, be pulled, be tripped over,
or damaged by persons walking on or objects rolling over
the cables.
•
This product must be installed within a restricted access
location not accessible by the general public.
•
Only personnel who are trained on the precautions for
the restricted access location can be granted entry to the
area.
•
Install the product so users and the audience cannot
enter the restricted area at eye level.
•
ELECTRICAL and BURN HAZARD! Use caution when
accessing internal components.
•
High leakage current present when connected to IT
power systems.
•
FIRE AND SHOCK HAZARD! Use only the attachments,
accessories, tools, and replacement parts specified by
Christie.
•
FIRE HAZARD! Do not use a power cord, harness, or
cable that appears damaged.
Important Safety Information
CP2420-Xe and CP4420-Xe Product Safety Guide
3
020-103564-01 Rev. 1 (12-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
