Freeze-dryer Alpha 3-4 LSCbasic
6 Operation
60 / 117
Version 11/2018, Rev. 1.9 of 01/12/2021
• sb
Translation of the original operating manuel
Status line (1)
This line shows the operating status of the freeze-dryer as well as the
active phase.
The status line also shows the current date and time. The clock is battery-
buffered and must be reset after a failure (siehe chapter 6.4.1.2 - "Main
window "Options"", Absatz "Verwaltung").
In addition, the drive symbol provides information concerning the status of
the external data storage device or of the network drive. The following
symbols are possible:
...
No
symbol
No USB storage device or LAN network connected
USB storage device connected
Active process recording on a USB storage device
Network available, but no network drive connected
Network drive connected (e.g. LyoLogplus)
Network drive connected and active process recording
Button "Schematic system diagram" (2)
The left side of the user interface shows a schematic view of the system
including all of its components. Active components are displayed in green.
Touching a component calls up its name and
→
reference designation
.
NOTE
The schematic system diagram always includes a drying chamber, even if
a manifold is installed in its place.
Fig. 26: Schematic system diagram with the name and reference designation of the
component
