Freeze-dryer Gamma 1-16 LSCplus
Freeze-dryer Gamma 2-16 LSCplus
6 Operation
Version 04/2013, Rev. 2.10 of 09/03/2020
• sb-dc
53 / 126
Translation of the original operating manual
Dialog box "Operating mode: select/start" (8)
After the set values have been entered for the process, the process can be
started manually with this function (see chapter 6.5.2 - "Manual freeze-
drying").
Fig. 28: Dialog box "Operating mode: select/start" (The version of the dialog box that is
displayed depends on the equipment of the freeze-dryer.)
Standard unit test
Apart from the process phases of the freeze-drying process ("Freezing",
"Warm-up", "Main drying", and "Final drying") and the operating mode
"Defrosting", the button "Unit Test" is also available. This button opens a
selection of a test with fixed parameters. After consultation with the
manufacturer, this test can be performed in order to check the functionality
and processes of the freeze-dryer.
Fig. 29: Dialog box "Standard unit test"
