Freeze-dryer Gamma 1-16 LSCplus
Freeze-dryer Gamma 2-16 LSCplus
6 Operation
76 / 126
Version 04/2013, Rev. 2.10 of 09/03/2020
• sb-dc
Translation of the original operating manual
“Program” buttons:
1
"Program"
2
"Program name"
3
"Show diagram "
4
"Insert section "
5
"Delete section "
6
Button for calling up
more functions and
set values
7
"Save"
Fig. 59: Editing a blank program template
• The button “Delete section” (5) can be used to delete sections.
• The button ">>more" (6) can be used to enter more functions and set
values in a program-related manner, depending on the type of freeze-
dryer (see the sections below).
• Proceed in this manner in order to create an entire program according
to your specific needs.
• Pressing the button “Diagram” (3) displays the program in the form of a
diagram.
• Pressing the button “Program name” (2) calls up an input field in which
the name of the program can be changed.
• The button “Save” (7) can be used in between or at the end of the
program creation in order to save the program.
• The button “Program” (1) calls up the main window. The system will ask
the user whether the program shall be saved if this has not been done
yet.
The program will be automatically assigned to the first free program storage
location. The creation of the program is now complete and it can be loaded.
