ChoiceMMed MD300I Скачать руководство пользователя страница 3

INSTRUCTION  MANUAL

MD300I

- 1 -

1 Introduction

1.1 Brief Introduction

Thank you for purchasing the handheld pulse oximeter for the functional oxygen saturation of 
arterial hemoglobin (SpO

2

) and Pulse Rate (PR) measurement. The pulse oximeter features 

PR tone modulation, data storage and data transmission capabilities. Please read the user 
manual carefully before using this instrument.

Note: 

• 

The illustrations applied in the manual may differ slightly from the actual device.

• 

The specifications are subject to change without prior notice. 

• 

The device is designed of handheld structure and please be sure not to turn upside 
down when using it.

1.2 Intended Use

The MD300I pulse oximeter is a portable non-invasive device intended for spot-checking of 
oxygen saturation of arterial hemoglobin (SpO

2

) and pulse rate of adult and pediatric patient 

at home and hospital (including clinical use in internist/surgery, Anesthesia, intensive care 

and etc). It is not for continuous monitoring.

1.3 Measurement Principle

Principle of the oximeter is as follows: A mathematical formula is established making use 
of Lambert Beer Law according to Spectrum Absorption Characteristics of Reductive 
hemoglobin (RHb) and Oxyhemoglobin (HbO2) in glow and near-infrared zones. Operation 
principle of the instrument: Photoelectric Oxyhemoglobin Inspection Technology is adopted 
in accordance with Capacity Pulse Scanning and Recording Technology, so that two beams 
of different wavelength of lights (660nm glow and 940nm near infrared light) can be focused 
onto a human nail tip through a clamping finger-type sensor. A measured signal obtained by a 

photosensitive element, will be shown on the oximeter’s display through process in electronic 

circuits and microprocessor.

Diagram of Operation Principle

1. Red and Infrared-ray Emission Tube
2. Red and Infrared-ray Receipt Tube

1.4 Safety Information

Conception of Warning, Caution and Note
The Warning, Caution and Note at this document are special information in favor of user’s 
operation.
• 

Warning - Indicates a potential hazard or unsafe practice that, if not avoided, will result 
in death or serious injury.

• 

Caution - Indicates a potential hazard or unsafe practice that, if not avoided, could 
result in minor personal injury or product/property damage.

Содержание MD300I
















Отзывы: