ChoiceMMed MD300I, Инструкция по эксплуатации

Страница: 13 / 15

INSTRUCTION MANUAL PULSE OXIMETER
MD300I
MD300I
- 20 - - 21 -
Binding sensor for pediatric
(Pediatric 15-45 Kg).
Model: M-50B
Confirm that the items listed are packed with the pulse oximeter. If any item on this list is
missed or damaged, contact your distributor. Contact the carrier immediately if the shipping
carton is damaged.
APPENDIX B Declaration
Guidance and manufacturer’s declaration - Electromagnetic emission----
for all EQUIPMENT AND SYSTEM
1
Guidance and manufacturer’s declaration- electromagnetic emission
2 The model MD300I Pulse Oximeter is intended for use in the electromagnetic
specified below. The customer or the user of the model MD300I Pulse Oximeter
should assure that it is such an environment.
3 Emissions
test
Compliance Electromagnetic environment-guidance
4 RF
e m i s s i o n s
CISPR11
Group 1 The model MD300I Pulse Oximeter uses RF
energy only for its internal function. Therefore,
its RF emissions are very low and are not
likely to cause any interference in nearby
electronic equipment.
5 RF
e m i s s i o n s
CISPR11
Group B
6 Harmonic
emissions
IEC 61000-
3-2
Class A
7 Voltage
fluctuations/
IEC 61000-
3-3
Complies
Guidance and manufacturer’s declaration - Electromagnetic Immunity-
For all Equipment and Systems
Guidance and manufacturer’s declaration- electromagnetic immunity
The model MD300I Pulse Oximeter is intended for use in the electromagnetic
environment specified below. The customer or the user of the model MD300I
Pulse Oximeter should assure that it is used in such an environment.
Immunity test IEC 60601
test level
Compliance level Electromagnetic
environment-guidance
Electrostatic
discharge
（
ESD
）
IEC
61000-4-2
±6kV contact
±8kV air ±6kV contact
±8kV air Floors should be
wood
，
concrete or
ceramic tile. If floors are
covered with synthetic
material
，
the relative
humidity should be at
least 30%.