Chocolate3 Choc mate 2, Руководство пользователя

Страница: 45 / 88

Page 45
5.8.4. Removing the print objects
At the end of the printing process, the magnetic bu-
ildplate (3) can be removed.
To do this, do not pull the buildplate (3) upwards,
but first push it to the side and then remove it.
Depending on the ambient temperature, the choco-
late needs another 1-10 minutes to finish crystallising.
A completely solid chocolate is the basis for remo-
ving the print objects. If necessary, briefly place the
buildplate (3) in a cool place.
To remove the print objects, grab the film on the bu-
ildplate (3) and pull it to the side and slightly upwards
at a very flat angle.
The print objects should now come off slowly. If the
angle is too steep, there is a risk that the print objects
will break.
If the objects have not yet completely detached from
the film, the film can be detached by bending it from
the underside.
Caution: Wait until the printer stops moving before
reaching into the printer.
Note: We recommend not to remove the print ob-
jects on the print bed (2), but to remove the build-
plate (3) and remove the objects on a solid surfa-
ce.
 