Chocolate3 Choc mate 2, Руководство пользователя

Страница: 34 / 88

Page 34
5.2. Switch-on routine
5.1. Important terms
Every time you switch on, the choc mate guides you through the most important steps.
Homing
Refers to the process of referencing the axes
(X, Y, Z and E) of the choc mate. Without this
process, the choc mate does not know the
position of each axis.
This process must be repeated occasionally
for individual axes.
Extrude
Refers to the process of material being pres-
sed out of the print head.
Babysteppping
Refers to a change in position of the Z axis
in small steps without changing the indicated
position. It is used to correct errors in the dis-
tance between the nozzle and the print sur-
face.
Retraction
Refers to the process of retracting the piston
to prevent material from oozing.
Open extruder
Moves the piston and the threaded rod to the upper-
most position. This is the only way to open the print
heads door (16).
This procedure should be carried out every time the
printer is started. The only exception is if the printer
has been restarted due to a problem and there is still
chocolate in the cartridge.
If there is no cartridge in the printhead, please keep it
closed with your hand during the entire process.
„Cancel“ ends the complete switch-on routine.