Chocolate3 Choc mate 2, Руководство пользователя

Страница: 24 / 88

Page 24
4.1. Location
Place the choc mate 2 in a cool or ideally air-
conditioned room with a year-round average
temperature b10 and +35°C and a
relative humidity of no more than 60%.
The 3D printer is not approved for operation in
an explosive atmosphere or in a damp room.
During printing, the ambient temperature
should be b18°C and +22°C. For best
results, we recommend a room air-conditio-
ned as precisely as possible to 19°C.
All three feet must stand firmly on the table
and be at least 10 cm from the edge. In all di-
rections there should be a distance of at least
20 cm to other objects. For ergonomic ope-
ration, the base should be at least 75 cm high
and there should be at least 125 cm of space
in front of the printer.
The power socket must be easily accessible
and in the immediate vicinity of the unit. In
case of emergency, it must be possible to dis-
connect the mains plug.
Select the operating mode so that children
cannot reach the product.
Do not place the appliance in the immediate
vicinity of open fire sources, such as cookers,
deep fryers or burning candles.
Make sure that the power cord is not crushed
or damaged by sharp edges when placing
the product.
Place the printer on a level, stable base such
as a table.
18 - 22 °C
Vibrations during the printing process can be
transmitted to the base if it is not sufficiently
stable and thus impair the printing result.
Make sure that the print bed can move freely
to the front and back and the print head to
the left and right.
Do not place the printer in the immediate vici-
nity of heat sources. Do not cover the printer
during operation. Every electronic device ge-
nerates waste heat, including our 3D printers.
The heating of our devices is within the per-
missible range. Nevertheless, it can happen
that sensitive surfaces discolour over time
due to the constant heat development. The-
Table Other items