Rackmounts
ON Series Replacement Battery Installation
3
Rack
-
mounts
To replace the battery pack in a rack-mount
unit, remove the battery cover by pushing
down on the indented latch approximately
1/8 in. (3 mm). Tilt the cover away from the
front panel.
Squeeze and unlatch the wire retainer from
the casing. Squeeze both sides of the plug
to unplug the battery pack(s).
Insert the new battery pack into the UPS
with the molded cover toward the front.
Once the battery pack is in place, insert the
plug and attach the wire retainer and front
cover.
See “Returning Depleted Batteries” on
page 9. for instruction on returning
depleted battery pack(s) to ONEAC.
Fig. 2: Battery Replacement for Rack
-mount UPS
ON600, ON900,
ON1300, ON2000
