Universal Mount
ON Series Replacement Battery Installation
7
Universal Mount ON2000
Battery replacement procedure is the same
as for the ON700, ON1000 and ON1500
units above. However, there are two sets of
batteries, each located behind the front
bezels on the ON2000 UPS (fig. 8).
Fig. 8: Battery Replacement for ON2000 UPS
NOTE:
Both sets of batteries must be
replaced at the same time to ensure proper
operation and expected runtimes.
See “Returning Depleted Batteries” on
page 9. for instruction on returning
depleted battery pack(s) to ONEAC.
Metal Front Bezel
ON700 and ON1000
To replace the battery pack in the universal
mount unit with a metal front bezel:
1. Remove the two black screws from
the left or bottom (vent) side of the
front bezel.
2. Slide the bezel to the left (bottom)
slightly and then pull away from the
UPS to remove.
