Returning Depleted Batteries
ON Series Replacement Battery Installation
9
7. Replace and secure the battery
retention plate with the screws
removed in step 2.
8. Replace the front bezel by placing it
squarely on the front and sliding to
the right (top) and replace the two
screws removed in step 1.
NOTE:
Do not replace the front bezel
without first securing the battery retention
plate.
Returning Depleted
Batteries
ONEAC provides pre-paid return for
depleted batteries with all replacement
battery purchases. Just follow these simple
steps:
1. Remove the new battery pack and
install it in the ONEAC unit as per the
installation instructions. Put the UPS
A.R.S label aside.
2. After the battery pack has been
replaced, place the depleted battery
pack in the box the same way the
replacement was packaged and seal
the box.
3. Follow the return instructions on the
back of the attached UPS A.R.S. label
and affix to the box.
4. To return to ONEAC for proper
recycling (at no cost to you), give the
box to any UPS pick-up driver or call
1-800-742-5877 for the nearest
drop-off location.
