Page 18 of 40 IRIS Connect Series Engineering Manual Version 1.8
Installation Wizard
The Installation wizard guides you through the set up process for the IRIS Connect dialler and if there is a problem
you will be told what it is and will not be allowed to continue until it is solved.
Note: During the Installation Wizard process some configurations may already be setup, when using a panel
integrated with the serial or RS485 connection. These configurations would have been downloaded from the
alarm panel setup and if these are incorrect they need to be corrected first in the alarm panel.
Select the Installation Wizard and follow the on screen prompts.
Battery
The first option within the Installation wizard is to confirm battery
backup is being used.
Note: If you are installing the IRIS Connect dialler without batteries
then please untick the ‘Use battery backup’ option.
Use Battery backup
If installing the IRIS Connect dialler without batteries then please
untick the Use battery backup option.
Network paths
The IRIS Connect Solo dialler has Wi-Fi for Single path communication
whereas the IRIS Connect Duo has Wi-Fi and GPRS/3G options for
single or dual communications.
Select the paths required between Ethernet, GPRS/3G and then click
‘Continue’.
Monitoring centre
Now you are asked to enter the account (name / number) reference
allocated by the monitoring centre which can be alphanumerical and
up to 32 characters long, but normally you would expect a 4 or 6 digit
numerical account number.
You will also be asked to enter in the monitoring centre IP address. This
can be obtained from the monitoring centre and would normally be
the external IP address for their IRIS Secure Apps system.
