Chiron Technology IRIS 8 Series, Инструкция по установке и эксплуатации

Страница: 31 / 43

11 Alarm Panel Upload and Download
Management calls using a standard modem and the alarm panel’s standard
management software for upload/download are supported by the IRIS Dialler.
Calls can be originated by the dialler and routed via the Dialler over IP or over an
ISDN or PSTN dial up link. Alternatively calls can be originated from the
management centre and routed to the dialler via IP, ISDN or PSTN.
Calls over IP use Voice over IP (VOIP) technology to transport the modem
signals over the IP network.
For calls originated by the dialler, the Dialler routes the call depending on the
format of the telephone number programmed into the dialler:
•
For routing of calls over IP, the telephone number programmed into the dialler
must be the IP address of the receiver prefixed with the digit “8”.
•
For routing of calls over ISDN or PSTN, the telephone number programmed in
the dialler must be telephone number of the receiver prefixed with the digit “9”
‘9’. The routes over PSTN or ISDN , depending on which network is
connected.
Calls made into the Dialler either over IP, ISDN or PSTN are routed to the DIAL
port that will send the ring signal to the dialler in the normal way.
For calls over ISDN or PSTN just connect the calling modem into a normal PSTN
socket and set the number to dial to the telephone number of the IRIS Dialler to
be called.
For calls over IP connect via another IRIS Dialler at the calling end. Connect the
calling modem to the DIAL socket of the Dialler and ensure the called number is
set to the appropriate IP address of the remote Dialler plus the “8” prefix, as
described above.
Note that if calls are being made into the Dialler over IP, it will need to be
allocated a fixed IP address to the Dialler. Please consult the local Network
Manager.
Version 1.5 16/10/06 31