Chino TP-L0260EN, Инструкция по эксплуатации, Страница: 20 / 23

13
Items Specifications
Number of contact output 2 Outputs
Kind of contact No-voltage contact output
Cable terminal names AL1, AL2
Max. output load voltage 400V (Peak AC)
Max. continuous load current 0.1A (Peak AC)
Peak load current 240mA (100ms/1 shot
）
Contact Rating (per
contact)
Max. output loss 300mW
Connection Custom-connector connection
Connector name [DC IN/IN/OUT]
Interface standard 10BASE-T/100BASE-TX
Data/Protocol
Data communication by UDP
Measured temperature data → To a master unit (PC, etc.)
Setting data ← From a master unit (PC, etc.)
Setting data IP address/alarm setting information, etc.
DHCP
Not supported
Thermal image sensor IP
address
192.168.1.254 (default at shipment)
Thermal image sensor
subnet mask
255.255.255.0
Default gateway 0 or FFFF (Not set)
Connection Custom-connector connection
Connector name [I/F]
■ Accessory (sold separately)
Protective case: Model: TP-ZCC1 (Refer to Extrernal Dimension.)
■ Minimum requirements for the CHINO application software
Compatible PC: DOS/V computers with PC/AT compatible
* The LAN port is required.
* Display resolution: 800 x 600 pixels or more recommended
* .NET Framework 2.0 or later has been installed and runs correctly.
Compatible OS: Windows 2000 (SP4 or later)/XP/Vista
* Windows XP or later recommended
* .NET Framework 2.0 or later required
C
o
n
ta
c
t
o
u
tp
u
t
s
p
e
c
if
ic
a
ti
o
n
s
E
th
e
rn
e
t
s
p
e
c
if
ic
a
ti
o
n
s